Wherever our Fully 3D-Printed Rubik’s Cube Solving Robot is shown off, it always generates lots of excitement and curiosity, be it a classroom full of kids, an office full of co-workers, or a trade show floor full of attendees.Now there is a way to bring about even more excitement and curiosity, even before the robot is unveiled. Just carry it into the room in a case that is also fully 3D-printed!
This carrying case was designed specifically with the robot’s dimensions in mind. The robot will fit in it perfectly with plenty of room for accessories. By no means a small project, the briefcase requires a printer with a large print platform, such as Creality CR-10, as some of its parts are outright massive. There are 44 parts overall, and you will need a big bag of metric M3-12 bolts and M3 nuts to hold them together.
Please note that while this carrying case will do a great job protecting your robot’s delicate machinery as you haul it around town, a shipping container IT IS NOT!
Parts List:
| Qty | Filename |
|---|---|
| Body & Lid Segments | |
| 2 | bc_a.stl |
| 2 | bc_b.stl |
| 1 | bc_c.stl |
| 1 | bc_d.stl |
| 1 | bc_e.stl |
| 1 | bc_f.stl |
| 1 | bc_g.stl |
| 1 | bc_h.stl |
| 4 | bc_i.stl |
| 2 | bc_k.stl |
| 2 | bc_l.stl |
| 1 | bc_m.stl |
| 2 | bc_n.stl |
| 1 | bc_o.stl |
| 1 | bc_p.stl |
| 1 | bc_s.stl |
| 8 | bc_corner.stl |
| Latches & Hinges | |
| 2 | bc_hinge.stl |
| 2 | bc_latch_top.stl |
| 2 | bc_latch_bottom.stl |
| 2 | bc_latch_buckle.stl |
| Handle | |
| 2 | bc_handle_base.stl |
| 1 | bc_handle_half1.stl |
| 1 | bc_handle_half2.stl |
For assembly instructions, please visit www.otvinta.com/download16.html.
| bc_a.stl | 138.3KB | |
| bc_b.stl | 139.9KB | |
| bc_c.stl | 160.3KB | |
| bc_corner.stl | 7.3MB | |
| bc_d.stl | 142.9KB | |
| bc_e.stl | 136.4KB | |
| bc_f.stl | 196.5KB | |
| bc_g.stl | 155.7KB | |
| bc_h.stl | 184.0KB | |
| bc_handle_base.stl | 79.8KB | |
| bc_handle_half1.stl | 140.5KB | |
| bc_handle_half2.stl | 102.6KB | |
| bc_hinge.stl | 575.9KB | |
| bc_i.stl | 91.9KB | |
| bc_k.stl | 58.1KB | |
| bc_l.stl | 109.5KB | |
| bc_latch_bottom.stl | 178.0KB | |
| bc_latch_buckle.stl | 272.0KB | |
| bc_latch_top.stl | 44.6KB | |
| bc_m.stl | 74.7KB | |
| bc_n.stl | 109.8KB | |
| bc_o.stl | 137.5KB | |
| bc_p.stl | 82.5KB | |
| bc_s.stl | 142.5KB |
