Rubber Vibration Damper Cutting Jig 3D Printer Model
The file 'Rubber Vibration Damper Cutting Jig 3D Printer Model' is (stl) file type, size is 182.8KB.
The file 'Rubber Vibration Damper Cutting Jig 3D Printer Model' is (stl) file type, size is 182.8KB.
Finding rubber vibration dampers sucks and cutting your own can be frustrating. Here's how I make mine. https://youtu.be/qR4UEhimXoo
I've got two sizes 2.5mm and 2mm. I'm always happy to make adjustments upon request.
Almost forgot, you'll need to bore out the hole with a 1/8" drill bit. Don't chuck the bit in a drill just twist it through with your fingers. This will allow the dowel to slide and spin nicely.
I recommend printing in PLA. The action with the razor blade is a lot smoother. The one demonstrated in the video is ABS. You can see it stick a couple times on me. Besides the tolerance with ABS may not allow you to get your razor into the slot with out modifying the STL
Enjoy and please let me know if you have any issues
Parts List:
-1/8" dowel
-razor blade
-rubber bands (optional)
-3mm or 1/8" ID 7mm or 1/4" OD silicone tubing (I use this from McMaster-Carr http://www.mcmaster.com/#51135k16/=14g1jgj)
| VibrationDampenerJig2.5mm_01.stl | 242.2KB | |
| VibrationDampenerJig2mm_01.stl | 242.2KB |
