Rubber Band Escapement 3D Printer Model
The file 'Rubber Band Escapement 3D Printer Model' is (stl) file type, size is 496.5KB.
The file 'Rubber Band Escapement 3D Printer Model' is (stl) file type, size is 496.5KB.
You can find a video about this here : https://youtu.be/4uL_IXx1_50
To finish it you will need 1 bearing 22mm by 8mm by 7mm and a thrust bearing 42mm by 25mm by 11mm. You will also need one rubber badn 5mm by 100mm long and a pice of rod 4mm thick by about 40-60cm long
| Axle.stl | 12.4KB | |
| Barrel_Clip.stl | 25.1KB | |
| Bottom_Frame.stl | 82.7KB | |
| Cap.stl | 86.2KB | |
| Escapement_Wheel.stl | 1.1MB | |
| Handle.stl | 147.2KB | |
| Pawl.stl | 74.2KB | |
| Pinion.stl | 91.3KB | |
| Rubber_Band_Post.stl | 55.6KB | |
| Top_Frame.stl | 51.8KB | |
| Top_Frame_Clip.stl | 13.3KB |
