RPi 4 DigiAMP Case 3D Printer Model
The file 'RPi 4 DigiAMP Case 3D Printer Model' is (stl) file type, size is 148.5KB.
The file 'RPi 4 DigiAMP Case 3D Printer Model' is (stl) file type, size is 148.5KB.
A simple case for a RPi4 with the DigiAmp hat.
The case has place for a 30mm fan, as you might want to keep it cool.
Screws are pocketed, not sticking out underneath the case.
2mm wall thickness. I broke the case with 1,5mm wall thickness when removing the hole supports.
Assembly order
1 - install the fan
2 - place the DS card in your RPi and place it in the base. Without hat!
3 - screw the RPi to the bottom with the spacers
4 - place the DigiAmp hat audio connectors through the holes, then pressing it on the RPi GIO header and screw it on the spacers
5 - click on the lid
| RPi4_DigiAmp_Case_base.stl | 2.4MB | |
| RPi4_DigiAmp_Case_lid.stl | 81.9KB |
