Set of Dice including D4, D6, D8, D10, D12 and D20. Each die has rounded corners,
font is "Viga" from fonts.google.com. All dice come pre-supported and can be printed right away on SLA-Printers!
After printing, you can remove the supports easily with a pair of pliers. Finish with wet sanding paper. I used and can recommend https://www.thingiverse.com/thing:3795542 for making a silicone mold to cast the dice with resin.
It is best to print the dice in clear resin, since they cure best. Uncured resin can prevent some types of silicone from hardening.
If you encounter issues in Lychee slicer, try the "_repaired" files. Thank you @TheHidden for fixing the files!
| supported_w10.stl | 7.8MB | |
| supported_w10_repaired_sup.stl | 9.4MB | |
| supported_w12.stl | 9.2MB | |
| supported_w12_repaired_sup.stl | 7.9MB | |
| supported_w20.stl | 5.6MB | |
| supported_w20_repaired_sup.stl | 5.2MB | |
| supported_w4.stl | 2.8MB | |
| supported_w4_repaired_sup.stl | 2.8MB | |
| supported_w6.stl | 1.8MB | |
| supported_w6_repaired_sup.stl | 1.8MB | |
| supported_w8.stl | 2.8MB | |
| supported_w8_repaired_sup.stl | 2.8MB | |
| w10.stl | 6.8MB | |
| w12.stl | 7.8MB | |
| w20.stl | 4.3MB | |
| w4.stl | 1.5MB | |
| w6.stl | 1.0MB | |
| w8.stl | 1.3MB |
