Hey guys,
this is a soap dish for round soaps.
Dimensions Ø86 x 25 mm
I recommend printing the grid with 40% infill and for the bottom part, a 20 to 30% infill should be enough.
On the inside it features a bevel for a better water drain, so it stays cleaner than a completely closed soap dish bowl.
| RBP_86x25_Seifenschale.STL | 629.6KB | |
| RTP_R80x4_Seifenschale.STL | 2.5MB | |
| TP_Seifenschale_Round_smalller_holes.STL | 555.7KB |
