It's a project box, tub with a lid and specific mounting holes and bosses to hold the stuff.
This box fits on the build-plate, barely, I've done one build ~24 hours for the box, ~8 hours for the lid.
Enterprising OpenSCAD designers should be able to lift parts from it for their own designs. I think the honeycomb texture is helping with shrinkage and stubborn removal issues, though it was still pretty hard for me to remove the box from the build plate. Compared to a 4"x4" flat bottomed build I just did, this hex pattern is indeed easier to get off the plate, but I discovered a new technique that makes even flat bottom prints easy to remove: heat the build plate to 130C and slide the spatula in under the soft ABS... seems to work every time.
The texture, and torus shapes, seem to be too much for the Customizer, it's giving script timeouts. Try the .scad file with OpenSCAD on your own computer, and have a little patience with the rendering times.
| RoundfaceBox.scad | 13.4KB | |
| RoundfaceBox.stl | 11.1MB | |
| RoundfaceBoxLid.stl | 4.6MB |
