Round components can be lasered with this ratation system.
I made this model for a friend, it is based on the "Rotary Axis For Diode Laser" from "ThothLoki".
According to his own statement, the model contains some problems, therefore I have redesigned it from scratch.
the complete assembly instructions can be found on printables.com
https://www.printables.com/de/model/354599-rotating-system-for-laser
| 1x_chuck-part-1.stl | 510.3KB | |
| 1x_chuck-part-2.stl | 342.7KB | |
| 1x_counter_support-positioning_arm.stl | 574.9KB | |
| 1x_counter_support-rotary_knob.stl | 1.1MB | |
| 1x_counter_support_cover.stl | 5.3MB | |
| 1x_counter_support_foot.stl | 2.3MB | |
| 1x_engine_mount-lower_gear-V2.stl | 5.3MB | |
| 1x_engine_mount-lower_gear.stl | 16.5MB | |
| 1x_engine_mount-upper_gear-V2.stl | 29.7MB | |
| 1x_engine_mount-upper_gear.stl | 22.8MB | |
| 1x_engine_mount-V4.stl | 2.6MB | |
| 1x_engine_mount.stl | 259.5KB | |
| 4x_chuck-jaw.stl | 951.5KB | |
| 4x_chuck-shell.stl | 156.2KB | |
| Rotary_System.f3z | 5.4MB |
