UPDATE

Added more versions for the Base. There is one with no hole for an on/off switch. I also made two separate versions with no extra support inside (which will make wiring easier but it might be less rigid) that also has two versions for on/off hole and no hole.

Be aware that there are parts you will have to purchase separately, and wiring and assembly is required so some basic wiring knowledge will be required I will not be providing support for how to wire (I expect you to know or be willing to figure it out)

I have REMOVED the globe ring file, it was not required as I had integrated it into the actual globe. Sorry for any confusion.

Basic Items Required:

• 12v DC Motor 3-4 RPM w/ 4mm Shaft (x1)

• 12x24x6mm Ball Bearings (x2)

• 12 Volt LED Lights Flush Mounted (x1)

• 5.5mm x 2.1mm 2 Pin DC Power Female Panel Mount Jack Socket Connector (x1)

• Push Button Switch 12V (x1) (Can provide a model with no switch if desired just send me a message)

• 12V 1A Switching Power Supply Adapter (x1)

• 18-20g Wire (spool)

I will include a text file with the same list as well as (non affiliate) links to Amazon where you can purchase the items or have a better idea of what you need and you can source them yourself.

Having an on off switch is optional, you could just wire it to be on when plugged in.

Some parts require light sanding for a perfect fit.

I suggest you print using quality settings as I have tight tolerances.

Here is a quick video of how it goes together
https://www.youtube.com/watch?v=TeYdjDEr6C4