I didn't like the dice falling under the table...
To prevent the dice from falling to the floor
I made a dice that could identify the number of dice by lightly turning it with a finger!
Used a magnet to correct position!
===========================================
Dice may not rotate smoothly in versions that do not require bearing.
Use a magnet if you want to stop in the correct position
Use bearings if you want a smooth rotation
Part
608 Bearing
Magnet 5x2
VIDEO : https://youtu.be/-KbdK4LeyRU
TIP : https://paypal.me/hobbyeon
| Arrow_x2.stl | 51.1KB | |
| Base.stl | 160.8KB | |
| Dice6_dot.stl | 31.2MB | |
| Dice6_num.stl | 2.6MB | |
| NoBearing_Arrow_x2.stl | 31.3KB | |
| NoBearing_Base.stl | 112.6KB |
![3D Printed RC Car V3 — Tarmo3 — Drivetrain [3/3] 3D Printer Model](https://res.3axis.co/4892eb0a-b77b-4637-8259-8901891615ad/images/6f35dbcc-c9a2-4376-8a43-c86827265090_thumb.jpg)
