Rotating Christmas Tree Desk Ornament 3D Printer Model
The file 'Rotating Christmas Tree Desk Ornament 3D Printer Model' is (stl,gcode) file type, size is 8.7MB.
The file 'Rotating Christmas Tree Desk Ornament 3D Printer Model' is (stl,gcode) file type, size is 8.7MB.
Tree alone stands about 7" (with base 9") Check out my models for the tea light version.
I recommend referencing/using my print files. If you're placing and slicing files for yourself, you'll have to scale 1000 for all parts. (If not printing base, you can use vase mode for the tree.)
For those using the base
Tree:
.2-layer height
perimeters 3 (same for all)
Aligned seams (all others=random seam)
Monotonic 5-top 6-bottom layers
no supports
infill Adaptive Cubic
Infill 2%
from 0cm-9cm 20% cubic infill
~60mm per second
Knob:
20%infill
Monotonic (same for rest)
Adaptive cubic
3-top 3-bottom (same for rest)
Base:
5% infill
Grid
Shafts:
20%infill
5mm brim
Gears: print flat side up
30% Infill
4-bottom 6-top
5mm brim
| 3856N119_Plastic_Bevel_Gear.stl | 1022.6KB | |
| 3856N119_Plastic_Bevel_Gear_33m_0.16mm_200C_PLA_ENDER3.gcode | 1.8MB | |
| 3856N121_Plastic_Bevel_Gear.stl | 2.2MB | |
| 3856N121_Plastic_Bevel_Gear_53m_0.16mm_200C_PLA_ENDER3.gcode | 2.9MB | |
| Christmas_base.stl | 207.0KB | |
| Christmas_base_1h48m_0.20mm_200C_PLA_ENDER3.gcode | 942.3KB | |
| christmas_base_bottom.stl | 84.7KB | |
| christmas_base_bottom_2h15m_0.20mm_200C_PLA_ENDER3.gcode | 2.4MB | |
| christmas_base_top.stl | 137.7KB | |
| christmas_base_top_2h9m_0.20mm_200C_PLA_ENDER3.gcode | 2.7MB | |
| christmas_knob.stl | 610.6KB | |
| christmas_knob_1h4m_0.20mm_200C_PLA_ENDER3.gcode | 2.9MB | |
| Christmas_tree.stl | 341.1KB | |
| Christmas_tree_adaptive_9h50m_0.20mm_200C_PLA_ENDER3.gcode | 11.7MB | |
| Crank_Rod.stl | 25.5KB | |
| Crank_Rod_28m_0.20mm_205C_PLA_ENDER3.gcode | 872.0KB | |
| Transfer_shaft.stl | 57.9KB | |
| Transfer_shaft_34m_0.20mm_205C_PLA_ENDER3.gcode | 1.1MB |
