Rotating Box Remix 3D Printer Model
The file 'Rotating Box Remix 3D Printer Model' is (stl) file type, size is 80.7KB.
The file 'Rotating Box Remix 3D Printer Model' is (stl) file type, size is 80.7KB.
I enlarged the rotating box from muh60's rotating box by 50%, included the pins in the project,and a lower box held by a hinge.
You nwill need supports on two hinged parts.
The parts with the pins should be 100% infill for strength.
Make sure all parts are loose by sanding and redrilling.All the parts can be held together by the knob that you glue on after putting th project together and making sure it works.
use the bambo stick to hold the hinge together.
| knob_plus_50.stl | 32.7KB | |
| lower_box_plus_50.stl | 24.8KB | |
| middle_disk_with_pegs__plus_50.stl | 140.8KB | |
| middle_plate_with_hinge_plus_50.stl | 88.0KB | |
| small_box_4__plus_50.stl | 31.5KB | |
| top_plate_plus_50.stl | 36.4KB |
