Rostock Max V2 Layer Fan Mount 3D Printer Model
The file 'Rostock Max V2 Layer Fan Mount 3D Printer Model' is (STL,STEP) file type, size is 16.3KB.
The file 'Rostock Max V2 Layer Fan Mount 3D Printer Model' is (STL,STEP) file type, size is 16.3KB.
1/12/17: I created a new lower profile fan mount to work with this e3dv6 mount: http://www.thingiverse.com/thing:1064131
This is a layer fan designed to keep the fan close to the hot end platform because the stock layer fan mount interfered with the enclosure I made. There is no hardware to use; simply slide it over a hot end platform tab. I have an E3Dv6 on my printer and it protrudes about 5/8" below the platform tabs. I have this mount going 1/2" below the tab it mounts on at a 20° angle to the hot end. It flows a good stream of air and I keep the fan at 80% because I don't want too much air flow interfering with the nozzle's temperature. I included a step file in case you wanted to modify anything for your own setup.
| Lo_Pro_e3dv6_Layer_Fan_.STL | 12.4KB | |
| Rostock_e3dv6_Layer_Fan_.STEP | 66.5KB | |
| Rostock_e3dv6_Layer_Fan_.STL | 12.2KB |
