This is a customizable rolling storage bin system.
Pick a size (small, medium, or large) and 8 bins that match your storage needs (you must include a "start" and "end" bin).
Connect the bins by inserting a short piece of filament into each hinge joint.
A new extra large bin size has been added. This is long enough to fit pens and markers.
A new alternate end bin design. Supports velcro straps or pull tabs to make opening the bin easier. This is highly recommended for the larger sized bins.
-New stackable core design.
-New drawer bin design.
-New sliding bin design.
Introduction
https://youtu.be/Cm5bByFYJKk
More Bins
https://youtu.be/ak8NoDQWSmo
Even More Bins
https://youtu.be/tUDJG0Tqd8U
Giant Rolling Storage Box
https://youtu.be/wqrAZMdrNLQ
| Cap.stl | 299.6KB | |
| Core_Stacking_Extra_Large.stl | 408.7KB | |
| Core_Stacking_Large.stl | 405.4KB | |
| Core_Stacking_Medium.stl | 376.8KB | |
| Core_Stacking_Small.stl | 358.7KB | |
| DISPLAY_ONLY_Assembled_Box.stl | 669.3KB | |
| Documentation_-_Internal_Bin_Measurements.pdf | 1.0MB | |
| Extra_Large_Bin_1_Divider.stl | 258.3KB | |
| Extra_Large_Bin_2_Dividers.stl | 259.5KB | |
| Extra_Large_Bin_End.stl | 167.1KB | |
| Extra_Large_Bin_End_With_Strap.stl | 199.3KB | |
| Extra_Large_Bin_Long_Divider.stl | 257.9KB | |
| Extra_Large_Bin_No_Divider.stl | 257.1KB | |
| Extra_Large_Bin_Start.stl | 167.9KB | |
| Extra_Large_Core.stl | 397.7KB | |
| Extra_Large_Drawer_Bin.stl | 255.6KB | |
| Extra_Large_Drawer_Insert.stl | 2.2KB | |
| Extra_Large_Sliding_Bin.stl | 253.8KB | |
| Extra_Large_Sliding_Bin_Insert.stl | 7.3KB | |
| Label_Insert.stl | 23.7KB | |
| Large_Bin_1_Divider.stl | 205.0KB | |
| Large_Bin_2_Dividers.stl | 206.1KB | |
| Large_Bin_End.stl | 137.6KB | |
| Large_Bin_End_with_Strap.stl | 160.4KB | |
| Large_Bin_Long_Divider.stl | 204.6KB | |
| Large_Bin_No_Divider.stl | 203.8KB | |
| Large_Bin_Start.stl | 136.4KB | |
| Large_Core.stl | 393.5KB | |
| Large_Drawer_Bin.stl | 202.0KB | |
| Large_Drawer_Insert.stl | 2.2KB | |
| Large_Sliding_Bin.stl | 200.1KB | |
| Large_Sliding_Bin_Insert.stl | 7.7KB | |
| Medium_Bin_1_Divider.stl | 162.5KB | |
| Medium_Bin_End.stl | 103.8KB | |
| Medium_Bin_End_With_Strap.stl | 136.0KB | |
| Medium_Bin_Long_Divider.stl | 162.1KB | |
| Medium_Bin_No_Divider.stl | 161.3KB | |
| Medium_Bin_Start.stl | 109.8KB | |
| Medium_Core.stl | 374.4KB | |
| Medium_Drawer_Bin.stl | 159.2KB | |
| Medium_Drawer_Insert.stl | 2.2KB | |
| Medium_Sliding_Bin.stl | 156.8KB | |
| Medium_Sliding_Bin_Insert.stl | 8.5KB | |
| OPTIONAL_Extra_Large_Print-In-Place_Pin.stl | 201.4KB | |
| OPTIONAL_Large_Print-In-Place_Pin.stl | 151.1KB | |
| OPTIONAL_Medium_Print-In-Place_Pin.stl | 113.2KB | |
| OPTIONAL_Small_Print-In-Place_Pin.stl | 83.9KB | |
| Rolling_Storage_Box_-_All_Parts.step | 9.4MB | |
| Small_Bin_1_Divider.stl | 113.1KB | |
| Small_Bin_End.stl | 77.9KB | |
| Small_Bin_Long_Divider.stl | 112.7KB | |
| Small_Bin_No_Divider.stl | 111.9KB | |
| Small_Bin_Start.stl | 81.6KB | |
| Small_Core.stl | 345.6KB | |
| Small_Drawer_Bin.stl | 109.2KB | |
| Small_Drawer_Insert.stl | 2.2KB | |
| Small_Sliding_Bin.stl | 106.2KB | |
| Small_Sliding_Bin_Insert.stl | 10.0KB | |
| Stackable_Cap.stl | 314.8KB | |
| Stackable_Cap_Special.stl | 510.9KB | |
| Stackable_Cap_Special_Lid.stl | 694.5KB | |
| Stackable_Core_Lock_Ring.stl | 4.8KB |
