Rollerstruder: Filament Feeder / Driver / Extruder 3D Printer Model
The file 'Rollerstruder: Filament Feeder / Driver / Extruder 3D Printer Model' is (scad,stl) file type, size is 712.2KB.
The file 'Rollerstruder: Filament Feeder / Driver / Extruder 3D Printer Model' is (scad,stl) file type, size is 712.2KB.
This is the filament driver I used (together with my hobbed bolt) sucessfully on my Ultimaker for the last 10 months (and this is PLA!)
It was designed originally for 3 mm but it would work alike with 1.75 mm as it boils down to how to the hobbed bolt (I ran it successfully with ~2 mm trimmer line filament)
This thing is in progress, though it is currently revision 5.3: I just should stop spending days on it since it is extremely reliable (much more than what I had stock).
It is written with openscad and it is fully parametric (incuding height, average thickness, bearing diameters...). It also prints quickly (2-3 hours), and almost in one piece (2mm walls and 30% infill is enough as it features internal dedicated structures).
People may be interested in the unusual features I think it has. Check my blog for the details.
| polyScrewThread.scad | 4.3KB | |
| rollerclamp-body.stl | 351.2KB | |
| rollerclamp.scad | 8.0KB | |
| rollerclamp_cone.stl | 562.1KB | |
| rollerclamp_nut.stl | 2.1MB | |
| rollerfeeder5.3b.scad | 35.5KB | |
| rollerfeeder5.3b.stl | 3.8MB | |
| simpleclamp.scad | 4.3KB | |
| simpleclamp_naked.stl | 133.1KB | |
| simpleclamp_pneufit_9p5.stl | 153.8KB | |
| simpleclamp_rivetnut.stl | 170.4KB | |
| um_hooks.scad | 4.8KB |
