Roller Tool 3D Printer Model
The file 'Roller Tool 3D Printer Model' is (stl) file type, size is 1.9MB.
The file 'Roller Tool 3D Printer Model' is (stl) file type, size is 1.9MB.
I made this to compress butyl rubber backed tape for my cousins house around the windows and for me to help me lay down DynaMat® in my car. Uses 608z or K08 bearings out of KP08 pillow block bearings and a couple of M8x1.25 x 20mm bolts.
My cousin's wife suggested it could also be used as a massage roller if a different roller was designed for it, so I quickly mocked up the Roller(Ball) model and haven't tested it yet. If anyone does and tries it out, please post the results.
Both my cousins and I were reefing on this thing pretty hard laying out fortiflash flashing for the windows and it didnt break, so I know its plenty strong in the handle (printed at 50% cubic subdivision in cura 3.6) .
Mod 1: Modified the space between the roller and the handle to allow for different protrusions from the roller face (ie the Roller(Ball) mounds).
| Handle.stl | 1.5MB | |
| Roller.stl | 890.2KB | |
| Roller_Bump.stl | 2.7MB | |
| Roller_Knurl.stl | 1.9MB |
