Rode VideoMicro Mount 3D Printer Model
The file 'Rode VideoMicro Mount 3D Printer Model' is (stl) file type, size is 107.5KB.
The file 'Rode VideoMicro Mount 3D Printer Model' is (stl) file type, size is 107.5KB.
This is a mount for the Rode VideoMicro, intended to be made from TPU. It snugly holds the microphone and allows for the microphone's included wind-buff and TRS cable to be used. The TRS cable is held internally to reduce the chance of it popping out and the cable is able to be routed out the hole on the side of the mount. Two M6 bolt holes are provided with enough space for an M6 washer as well.
The upper and lower portions of the mount are secured together with zip-ties that travel through internal channels inspired by this video: https://www.youtube.com/watch?v=qgt9P6jsyaY
The mount was originally designed to be bolted to an exhaust heat shield near the exhaust of a 2023 Toyota GR86, in order to capture exhaust audio.
| Rode_VideoMicro_Mount_v5_lower.stl | 280.8KB | |
| Rode_VideoMicro_Mount_v5_upper.stl | 164.7KB |
