Rod Holder-A Third Hand On The Water 3D Printer Model
The file 'Rod Holder-A Third Hand On The Water 3D Printer Model' is (stl) file type, size is 456.5KB.
The file 'Rod Holder-A Third Hand On The Water 3D Printer Model' is (stl) file type, size is 456.5KB.
This is a simple TPU print that can be clipped to you or your bag to hold your rod while you adjust flies and lures.
The stock model has a cone shaped channel that narrows from 6mm at the bottom to 5mm at the top. The large model has a channel that tapers from 8mm to 7mm. Both models have a 6mm hanging hole. You can scale the model based on the diameter of the rod used and where along the rod you want to grip.
Rod Holder: suits rods with a diameter around 6mm.
Rod Holder Large: suits rods with a diameter around 8mm
There are two variations (1 & 2) with the hanger hole positioned differently depending on how you want it to hang and what you are hanging it with; I use Nite-Ize S-biners.
I printed with 1.2mm walls and 40% CONCENTRIC infill at 0.2mm height. You can adjust the infill density to make a more or less flexible print.
| rod_hanger_3.stl | 244.1KB | |
| rod_holder_1.stl | 211.4KB | |
| rod_holder_1_large.stl | 199.8KB | |
| rod_holder_2.stl | 235.0KB | |
| rod_holder_2_large.stl | 223.9KB | |
| rod_holder_4.stl | 192.7KB |
