Mini Ultra LoRaWAN Enclosure

A 3D printable enclosure has been created to house the Rocket Scream Mini Ultra LoRaWAN device with pinheaders and battery holder installed. The enclosure may need to be modified if additional hardware/sensors/etc have been mounted. This has been tested with an SMA antenna mount on 868/915MHz devices.

Assembly of the enclosure will require qty 4 x 20mm socket cap head M2 screws and qty 4 x M2 nuts.

Two variations are available: one three-part model which includes a gasket to help seal the enclosure, and one that can print without a gasket suitable for indoor use.

Weatherproof gasket

For maximum weather resistance when mounting outdoors, print the following files in PETG:

• RocketScream_MiniUltraLoRaWAN_bottom.stl
• RocketScream_MiniUltraLoRaWAN_top.stl

Print the gasket model in a flexible filament such as TPU:

• RocketScream_MiniUltraLoRaWAN_gasket.stl

Indoor mounting

For mounting indoors, print the following files in PETG:

• RocketScream_MiniUltraLoRaWAN_bottom_-_no_gasket.stl
• RocketScream_MiniUltraLoRaWAN_top.stl

Mounting clip

A simple mounting clip is provided for easy mounting to a vertical surface.

• RocketScream_MiniUltraLoRaWAN_mount.stl

Model source

The enclosure was created with SketchUp and can be modified using SketchUp Free.