Printed it with supports. They are a bit tricky to remove from the inner F screw, but they are manageable.
After the print, use a 22cm of 28mm PVC pipe and glue around it an LED strip.
Enjoy!
| Rocket_cone.stl | 120.8KB | |
| Rocket_lamp_base.stl | 320.6KB | |
| Rocket_length_section.stl | 90.9KB | |
| Rocket_top_length_section.stl | 70.2KB | |
| screw_in_for_28mm_pvc_pipe.stl | 186.8KB |
