Rocket Lab Neutron Launch Vehicle 3D Printer Model
The file 'Rocket Lab Neutron Launch Vehicle 3D Printer Model' is (stl) file type, size is 16.1MB.
The file 'Rocket Lab Neutron Launch Vehicle 3D Printer Model' is (stl) file type, size is 16.1MB.
1:100 scale model of Rocket Lab's newly announced launch vehicle. Based on the render on Rocket Lab's website: https://www.rocketlabusa.com/launch/neutron/, as well as snapshots taken from their official reveal video: https://www.youtube.com/watch?v=7kwAPr5G6WA.
Fairings are not articulated, but you can choose between an open and a closed one. Tank volumes are just guesswork; assumed to be Oxygen 1 : 0.73 Methane by volume.
Everything about the second stage is highly speculative until we get to know more.
This project is not affiliated with any company. I simply liked the rocket, made a model and thought I'd share.
| Canard_left_side.stl | 51.9KB | |
| Canard_right_side.stl | 51.9KB | |
| Fairing_closed.stl | 1.1MB | |
| Fairing_petal_open.stl | 309.8KB | |
| First_Stage_Engine.stl | 2.3MB | |
| First_Stage_Hull_bottom.stl | 2.1MB | |
| First_Stage_Hull_middle.stl | 1.7MB | |
| First_Stage_Hull_top.stl | 612.6KB | |
| Neutron_full_model_closed.stl | 19.2MB | |
| Neutron_full_model_open.stl | 21.2MB | |
| Satellite.stl | 88.2KB | |
| Second_Stage_engine.stl | 1.7MB | |
| Second_stage_full_model.stl | 1.9MB | |
| Second_Stage_tank.stl | 646.2KB |
