Rocket Camera Pod 3D Printer Model
The file 'Rocket Camera Pod 3D Printer Model' is (stl) file type, size is 4.6MB.
The file 'Rocket Camera Pod 3D Printer Model' is (stl) file type, size is 4.6MB.
This is a simple and inexpensive way of obtaining good quality video/sound from a model rocket in flight. The body tube is a standard approximately 24mm I.D. / 15/16". As with all model rockets, careful construction, balance, supervision, and experience is required for this project to be optimal. If you are not experienced determining model rocket aerodynamics and balance, do not use this modification.
Note- You must locate and drill two 4.00mm holes for accessing the switch buttons and a 1.00mm hole for observing the indicator light.
Thanks, Enjoy!
| Pod_print.stl | 14.0MB |
