The file 'Rock Van FX118 Mounts 3D Printer Model' is (stl) file type, size is 450.1KB.
These are mounts required to mount a Hobby Plus Rock Van to the Furitek FX118 chassis. Print then clean out holes with a body reamer or file.
Will need to print 2 of each.
I printed with a 0.4 nozzle. Would be better if a smaller nozzle was used due to its small sized.
Rock_Van_Front_Body_Mount.stl | 751.4KB | |
Rock_Van_Rear_Body_Post_FX118.stl | 334.7KB |