Robotech – VF1 And Battleoid 3D Printer Model
The file 'Robotech – VF1 And Battleoid 3D Printer Model' is (pdf,stl) file type, size is 26.5MB.
The file 'Robotech – VF1 And Battleoid 3D Printer Model' is (pdf,stl) file type, size is 26.5MB.
This is a remix of a model by Jiri which I updated and fixed a couple of parts which had manifold edges, etc...
You will need the PDF in the download to know which files to print to assemble either a Vertiech VF1 and or a Battleoid.
Update 5.29.18 - Updated with a new nose with a cut like in the original model. Uploaded a model of the Veritech (incomplete and only for visual reference)
Note: If you print this refer to the Thingiverse page for the parts. The original instructions are vague and you'll need to see which part goes where for each assembly.
Enjoy. Please post pics of any prints. I will make the Robotech decals for Roy Fokker and Rick Hunter's fighters. I will finish my print and start on decal creation.
| 3D_VF1_Instructions.pdf | 643.3KB | |
| arm-1-2-1.stl | 251.3KB | |
| arm-10-2x-1.stl | 411.8KB | |
| arm-2-2x-1.stl | 72.1KB | |
| arm-3-2x-1.stl | 147.4KB | |
| arm-4-2x-1.stl | 109.9KB | |
| arm-5-2x-1.stl | 109.9KB | |
| arm-6-2x-1.stl | 158.4KB | |
| arm-7-2x-1.stl | 92.9KB | |
| arm-8-2x-1.stl | 89.1KB | |
| arm-9-4x-1.stl | 29.0KB | |
| ball-joint-robotmode-2x-1.stl | 788.7KB | |
| gun-1-1.stl | 998.0KB | |
| gun-2-1.stl | 658.9KB | |
| hand-l-1.stl | 360.3KB | |
| hand-l-2-1.stl | 461.6KB | |
| hand-l-3-1.stl | 899.4KB | |
| hand-r-1.stl | 360.3KB | |
| hand-r-2-1.stl | 461.6KB | |
| hand-r-3-1.stl | 899.4KB | |
| head-head-1.stl | 999.7KB | |
| head-laser-l-1.stl | 1.9MB | |
| head-laser-r-1.stl | 1.9MB | |
| head-pin-1.stl | 123.5KB | |
| head-rod-1.stl | 135.6KB | |
| head-rod-2-1.stl | 81.9KB | |
| jetpack-1-1.stl | 790.6KB | |
| jetpack-2-1.stl | 716.7KB | |
| jetpack-flap-1.stl | 373.8KB | |
| jetpack-joint-1.stl | 228.1KB | |
| jetpack-wing-l-1.stl | 460.9KB | |
| jetpack-wing-r-1.stl | 460.9KB | |
| leg-1-1.stl | 1.4MB | |
| leg-10-1.stl | 987.6KB | |
| leg-11-2x-1.stl | 465.5KB | |
| leg-12-2x-1.stl | 981.9KB | |
| leg-13-2x-1.stl | 142.5KB | |
| leg-14-2x-1.stl | 84.1KB | |
| leg-15-2x-1.stl | 255.4KB | |
| leg-16-2x-1.stl | 248.6KB | |
| leg-17-2x-1.stl | 115.5KB | |
| leg-18-2x-1.stl | 114.1KB | |
| leg-19-robotmode-1.stl | 90.4KB | |
| leg-2-1.stl | 514.0KB | |
| leg-3-1.stl | 427.7KB | |
| leg-4-1.stl | 301.2KB | |
| leg-5-1.stl | 149.8KB | |
| leg-6-2x-1.stl | 485.5KB | |
| leg-7-2x-1.stl | 42.3KB | |
| leg-8-2x-1.stl | 77.9KB | |
| leg-9-1.stl | 596.9KB | |
| leg-r-1-1.stl | 987.6KB | |
| leg-r-2-1.stl | 596.6KB | |
| leg-r-3-1.stl | 1.4MB | |
| leg-r-4-1.stl | 514.0KB | |
| leg-r-5-robotmode-1.stl | 90.4KB | |
| leg-r-6-1.stl | 514.0KB | |
| nose-plane-1.stl | 2.6MB | |
| nose-plane-1v2.stl | 2.6MB | |
| nose-robot-1-1.stl | 32.0KB | |
| nose-robot-2-1.stl | 32.0KB | |
| nose-robot-3-1.stl | 120.9KB | |
| nose-robot-4-1.stl | 203.5KB | |
| nose-robot-5.stl | 2.6MB | |
| shoulder-l-1-1.stl | 89.1KB | |
| shoulder-l-2-1.stl | 189.5KB | |
| shoulder-l-3-2x-1.stl | 90.7KB | |
| shoulder-r-1-1.stl | 89.1KB | |
| shoulder-r-2-1.stl | 189.5KB | |
| toroso-stop-4x-1.stl | 53.0KB | |
| torso-1-1.stl | 1.5MB | |
| torso-2-1.stl | 1.1MB | |
| torso-3-1.stl | 609.7KB | |
| torso-4-1.stl | 387.3KB | |
| torso-lock-2x-1.stl | 274.5KB | |
| torso-rail-1.stl | 404.0KB | |
| torso-rail-2-1.stl | 404.0KB | |
| torso-rod-2x-1.stl | 83.9KB | |
| VeritechMockup.stl | 19.5MB | |
| wing-joint-l-1.stl | 41.4KB | |
| wing-joint-r-1.stl | 41.4KB | |
| wing-l-1.stl | 158.8KB | |
| wing-r-1.stl | 157.2KB |
