Robot V 3D Printer Model
The file 'Robot V 3D Printer Model' is (STL) file type, size is 270.5MB.
The file 'Robot V 3D Printer Model' is (STL) file type, size is 270.5MB.
Robot V, measured by hand, drawn & rendered in SolidWorks 2015.
The Robot V is a 13" toy/model kit of "Johnny Five," the robotic leading character from the 1986 movie, "Short Circuit."
Robot V was designed by Mike Van Plew & Thomas "wizojoz" Jozwiak in 2009, and manufactured in China. Less than 1000 units were ever made. It is the only publicly available action figure of J5. The toy was/is injection molded, so some of these parts will seem a bit strange.
This is NOT a replica of the movie prop. This is a unique design by Mike Van Plew; I only drew it up. As such, this is for NON-COMMERCIAL uses only! However, I encourage everyone to freely make modifications and add-ons for this guy! I'd love to see them!
Check out tons of pictures & mods of the actual Robot V toy on Facebook: https://www.facebook.com/groups/Johnny5toy
| Lower_Portion_-_Caster_-_Caster_Female.STL | 7.2MB | |
| Lower_Portion_-_Caster_-_Caster_Male.STL | 7.2MB | |
| Lower_Portion_-_Caster_-_Spindle.STL | 5.5MB | |
| Lower_Portion_-_Cradle_Base_-_Battery_Door.STL | 4.1MB | |
| Lower_Portion_-_Cradle_Base_-_Cradle_Base_Lower.STL | 11.8MB | |
| Lower_Portion_-_Cradle_Base_-_Cradle_Base_Upper.STL | 29.0MB | |
| Lower_Portion_-_Cradle_Base_-_Lower_Torso_Actuator.STL | 6.7MB | |
| Lower_Portion_-_Lower_Torso_-_Console_Door.STL | 4.6MB | |
| Lower_Portion_-_Lower_Torso_-_Lower_Torso_Front.STL | 6.0MB | |
| Lower_Portion_-_Lower_Torso_-_Lower_Torso_Rear.STL | 6.9MB | |
| Lower_Portion_-_Track_Drives_Both_-_Roller_Female.STL | 3.1MB | |
| Lower_Portion_-_Track_Drives_Both_-_Roller_Male.STL | 3.8MB | |
| Lower_Portion_-_Track_Drives_Both_-_Treads.STL | 168.2MB | |
| Lower_Portion_-_Track_Drive_Left_-_TDRV_Beauty_Cover_Left.STL | 10.6MB | |
| Lower_Portion_-_Track_Drive_Left_-_Track_Drive_Side_Left_Inner.STL | 7.8MB | |
| Lower_Portion_-_Track_Drive_Left_-_Track_Drive_Side_Left_Outer.STL | 13.7MB | |
| Lower_Portion_-_Track_Drive_Right_-_TDRV_Beauty_Cover_Right.STL | 10.6MB | |
| Lower_Portion_-_Track_Drive_Right_-_Track_Drive_Side_Right_Inner.STL | 7.8MB | |
| Lower_Portion_-_Track_Drive_Right_-_Track_Drive_Side_Right_Outer.STL | 13.7MB | |
| Lower_Portion_-_Waist_-_Waist_Left.STL | 6.4MB | |
| Lower_Portion_-_Waist_-_Waist_Right.STL | 6.4MB | |
| Shapeways_-_Head_-_Cheek_Left.STL | 331.4KB | |
| Shapeways_-_Head_-_Cheek_Right.STL | 303.4KB | |
| Shapeways_-_Head_-_Eye.STL | 356.8KB | |
| Shapeways_-_Head_-_Lip_Lights.STL | 16.3MB | |
| Upper_Portion_-_Accessory_-_Accessory_Adaptor.STL | 2.9MB | |
| Upper_Portion_-_Accessory_-_Accessory_Adaptor_Interconnect.STL | 60.6KB | |
| Upper_Portion_-_Accessory_-_Accessory_Mount.STL | 7.2MB | |
| Upper_Portion_-_Accessory_-_Laser_Bottom.STL | 8.4MB | |
| Upper_Portion_-_Accessory_-_Laser_Top.STL | 1.7MB | |
| Upper_Portion_-_Accessory_-_Toolbox_Bottom.STL | 1.6MB | |
| Upper_Portion_-_Accessory_-_Toolbox_Top.STL | 5.8MB | |
| Upper_Portion_-_Arms_Both_-_Finger_Linside-Routside.STL | 3.7MB | |
| Upper_Portion_-_Arms_Both_-_Finger_Loutside-Rinside.STL | 3.7MB | |
| Upper_Portion_-_Arms_Both_-_Lower_Arm_Left.STL | 6.0MB | |
| Upper_Portion_-_Arms_Both_-_Lower_Arm_Right.STL | 6.0MB | |
| Upper_Portion_-_Arm_Left_-_Bicep_Left_Inner.STL | 5.8MB | |
| Upper_Portion_-_Arm_Left_-_Bicep_Left_Outer.STL | 9.7MB | |
| Upper_Portion_-_Arm_Left_-_Shoulder_Left_Front.STL | 7.2MB | |
| Upper_Portion_-_Arm_Left_-_Shoulder_Left_Rear.STL | 7.5MB | |
| Upper_Portion_-_Arm_Right_-_Bicep_Right_Inner.STL | 5.8MB | |
| Upper_Portion_-_Arm_Right_-_Bicep_Right_Outer.STL | 9.7MB | |
| Upper_Portion_-_Arm_Right_-_Shoulder_Right_Front.STL | 7.2MB | |
| Upper_Portion_-_Arm_Right_-_Shoulder_Right_Rear.STL | 7.5MB | |
| Upper_Portion_-_Head_-_Cheek_Left.STL | 45.3MB | |
| Upper_Portion_-_Head_-_Cheek_Right.STL | 38.8MB | |
| Upper_Portion_-_Head_-_Eye.STL | 7.9MB | |
| Upper_Portion_-_Head_-_Head_Detail_Plate.STL | 17.3MB | |
| Upper_Portion_-_Head_-_Head_Front.STL | 5.6MB | |
| Upper_Portion_-_Head_-_Head_Rear.STL | 4.7MB | |
| Upper_Portion_-_Head_-_Lens.STL | 36.8KB | |
| Upper_Portion_-_Head_-_Lower_Eyeflap_Left.STL | 29.6KB | |
| Upper_Portion_-_Head_-_Lower_Eyeflap_Right.STL | 29.6KB | |
| Upper_Portion_-_Head_-_Upper_Eyeflap_Left.STL | 47.2KB | |
| Upper_Portion_-_Head_-_Upper_Eyeflap_Right.STL | 47.2KB | |
| Upper_Portion_-_Head_-_Whip_Antenna.STL | 1.5MB | |
| Upper_Portion_-_Neck_-_Neck_Block.STL | 2.0MB | |
| Upper_Portion_-_Neck_-_Neck_Column.STL | 9.2MB | |
| Upper_Portion_-_Neck_-_Neck_Cylinders.STL | 7.0MB | |
| Upper_Portion_-_Neck_-_Neck_Rods_Rear.STL | 15.3MB | |
| Upper_Portion_-_Neck_-_Neck_Rod_Front.STL | 8.3MB | |
| Upper_Portion_-_Tool_Arm_-_Tool_Arm_Inner.STL | 14.9MB | |
| Upper_Portion_-_Tool_Arm_-_Tool_Arm_Outer.STL | 13.7MB | |
| Upper_Portion_-_Upper_Torso_-_Upper_Torso_Detail_Plate.STL | 9.7MB | |
| Upper_Portion_-_Upper_Torso_-_Upper_Torso_Front.STL | 29.8MB | |
| Upper_Portion_-_Upper_Torso_-_Upper_Torso_Rear.STL | 16.4MB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
