Robot (including Trollbot Heads) 3D Printer Model
The file 'Robot (including Trollbot Heads) 3D Printer Model' is (stl) file type, size is 8.7MB.
The file 'Robot (including Trollbot Heads) 3D Printer Model' is (stl) file type, size is 8.7MB.
Pick and print a head, a body, arm set and leg combo.
Print and then assemble your own robot.
Four example assemblies shown from a huge number of possible combinations
I'd love to see some of the makes from this :)
Check out my other Designs
https://www.thingiverse.com/stefanjsimons/designs
| Arm_1.stl | 386.3KB | |
| Arm_2c.stl | 605.5KB | |
| Arm_3a.stl | 345.5KB | |
| centaur.stl | 542.5KB | |
| Chassis_1.stl | 1.0MB | |
| Chassis_2b.stl | 1.7MB | |
| Chassis_3.stl | 1.9MB | |
| Chassis_4d.stl | 604.8KB | |
| Hand_1_6.3.stl | 377.3KB | |
| Hand_2_6.3.stl | 954.5KB | |
| Hand_3_6.3.stl | 415.1KB | |
| Head_1.stl | 1.1MB | |
| Head_2.stl | 973.7KB | |
| Head_3.stl | 428.4KB | |
| Legs_1.stl | 2.0MB | |
| Mono_1B.stl | 2.5MB | |
| One_Leg.stl | 1.1MB | |
| Pin_1.stl | 1.2MB | |
| Pin_2D.stl | 837.1KB | |
| Tracks_1b.stl | 304.2KB | |
| tripod_1.stl | 2.2MB | |
| tripod_2.stl | 2.2MB | |
| Troll_Head_Cone_1.stl | 660.1KB | |
| Troll_Head_Dome.stl | 1008.1KB | |
| Troll_Head_Standard_1.stl | 892.8KB | |
| Waist_3.stl | 1.2MB |
