Roborock E4 E5 Stepheight-Reducer 3D Printer Model
The file 'Roborock E4 E5 Stepheight-Reducer 3D Printer Model' is (stl) file type, size is 4.5KB.
The file 'Roborock E4 E5 Stepheight-Reducer 3D Printer Model' is (stl) file type, size is 4.5KB.
Clips to prevent Roborock Vacuum cleaner from getting stuck at steeper slopes like bar-chairs. Mount them close to the optical front sensors (those of which are used to prevent from falling down a stair and as seen on the photos) of the front bumper of the Roborock E4/E5. This should prevent the Roborock E4/E5 from taking to high slopes and getting stuck. I tested it on stairs too. The optical sensors should not be affected and the robot stops before falling. Nevertheless, I don't guarantee anything.
Try to lay one of the thin sides on the build plate. Then print 4 of em all together. as close as possible.
Printed with 65° Bed-Temp for first layer. Then reduce to 60.
Nozzle temp at 225° at the first layer. Then reduced to 215°.
| roborock_E4_E5_upgrade.stl | 19.0KB |
