The original storage solution is too tight for the bot minis and does not facilitate easy setup. This set of trays allows you to pull them from the box and aside from some shuffling provides for a quick setup. I was, also, noticing that the expansion boards were starting to result in some lid lift, no guarantee that that won't happen eventually, but for now it all fits well.
I resized Darioism's card tray to fit the Robo Rally cards.
You will want to print :
RR_Card_Component_Tray x 6
RR_Card_Tray x 2
RR_Tray_1 x 2
RR_Tray_2 x 1
I used an appropriate color of silk PLA for the component trays to make it easier to setup and put away. There is currently plenty of room for at least a couple of additional expansions. If you found it helpful, feel free to buy me a coffee.
| RR_Card_Component_Tray.stl | 47.9KB | |
| RR_Card_Tray.stl | 508.5KB | |
| RR_Tray_1.stl | 8.7KB | |
| RR_Tray_2.stl | 8.7KB |
