Robby The Robot Vehicle 3D Printer Model
The file 'Robby The Robot Vehicle 3D Printer Model' is (stl) file type, size is 46.1MB.
The file 'Robby The Robot Vehicle 3D Printer Model' is (stl) file type, size is 46.1MB.
New files added , Main body, upper frame, lower door left, lower door right
Robby the Robot Vehicle from the Forbidden Planet
there is an overview file to show how parts fir together.
Itinerary includes
Vehicle Base 1
Main Body 1
upper frame 1
Upper door right 1
upper door left 1
Lower door right 1
Lower door left 1
Upper door spindle x2
lower doors spindle x2
axils x2
Wheel x4
very much a work in progress
Although Robby isn't included in these files
the previous upload of Robby will work fine at 80% of this one,
Download and use software to dry fit parts, axles and door spindles should be done in steel, if possible, holes in parts may need to be drills and sanded when printed at 100% print the model will be large and expensive to print so as an indicator
Robby fits into this model when reduced to 75%
so as a rule, if Robby is 100% your figure will achieve a Hight of around 12" (300mm)
so printing Robby at 50 % 150mm, therefor this model would need to be printed at 60%
Hence the need for a dry/electronic fit
any questions drop me a note
| Forbidden_Planet_Axle.stl | 36.2KB | |
| Forbidden_Planet_Lower_door_spindle.stl | 24.9KB | |
| Forbidden_Planet_lower_Left_door_2.stl | 4.9MB | |
| Forbidden_Planet_lower_right_door_2.stl | 4.9MB | |
| Forbidden_Planet_Main_body_2.stl | 7.2MB | |
| Forbidden_Planet_Robby_and_vehicle.stl | 73.6MB | |
| Forbidden_Planet_Upper_frame_2.stl | 14.2MB | |
| Forbidden_Planet_upper_Left_door.stl | 7.2MB | |
| Forbidden_Planet_upper_right_door.stl | 7.2MB | |
| Forbidden_Planet_wheel.stl | 1.2MB |
