Some custom parts for awesome Robak RC car robaki.dev
Wing (PCTG or PETG) & wing mount (hard TPU). 35mm M3 screws needed. Scaling 10 times can be needed in some slicers.
LowPoly body front mount (hard TPU). 35mm m3 screws needed.
Head and back lights with backcovers (PCTG). They fir perfect to brace_knog from 2.2 Robak version. I Used 60 degrees plastic power led lens and 1W power leds. 100 Ohm resistor for deep red LEDs and 10 Ohm resistor for cold white LEDs. They are powered directly from RX.
Traxxas 5858 to Injora 100 mm shocks adapter (TPU). They fit tight so if there is problem to put them on Shock please enlarge them about 5% in slicer.
| LowPolyBodyFrontClip.stl | 35.1KB | |
| Power_Led_Mount_Front.stl | 122.7KB | |
| Power_Led_Mount_Front_Backcover.stl | 16.7KB | |
| Power_Led_Mount_rear.stl | 117.4KB | |
| Power_Led_Mount_rear_backcover.stl | 15.1KB | |
| Robak_Wing.stl | 1.9MB | |
| Robak_Wing_mount.stl | 81.3KB | |
| Traxxas_5858_to_Injora_adapter.stl | 56.9KB |
