The attached files represent some heavy-duty steam-driven victorian factory equipment to accompany my Ripper's London range, intended for, but not limited to 28mm wargaming scenery. It should be also useful for any range requiring machinery including steampunk, railway enthusiasts, dwarven mining overseers, etc. There are pumps and wheels and pipes and containers and...stuff I have no idea about for you to create your own design. The sharper-eyed amongst you will have noticed that I haven't created a factory for them to sit in yet - but it's en route - I'm just having a passionate debate ( sadly with myself ) about the right scale to use.
| flask_end_1a.stl | 390.2KB | |
| flask_end_1b.stl | 458.1KB | |
| flask_mid1.stl | 66.0KB | |
| flask_ring1.stl | 81.8KB | |
| flask_support1a.stl | 33.3KB | |
| flask_support1b.stl | 33.3KB | |
| gauge1.stl | 60.8KB | |
| gauge_support1.stl | 16.8KB | |
| half_large_pipe1.stl | 69.0KB | |
| half_piston_axle1.stl | 22.6KB | |
| half_wheel_axle1.stl | 46.7KB | |
| hvy_block_body1.stl | 40.1KB | |
| hvy_block_plate1.stl | 10.0KB | |
| large_cyl_half_1a.stl | 384.5KB | |
| large_cyl_half_1b.stl | 209.6KB | |
| large_cyl_support_1a.stl | 27.6KB | |
| large_cyl_support_1b.stl | 28.4KB | |
| paving1a.stl | 2.7KB | |
| pipe_90deg_1.stl | 423.3KB | |
| pipe_end1.stl | 37.5KB | |
| pipe_end_no_middle1.stl | 52.5KB | |
| piston_block_1a.stl | 23.6KB | |
| piston_block_1b.stl | 21.4KB | |
| piston_half_1a.stl | 130.4KB | |
| piston_half_1b.stl | 130.0KB | |
| shut_off_wheel1.stl | 437.5KB | |
| shut_off_wheel_small1.stl | 378.8KB | |
| small_cyl_1a.stl | 129.2KB | |
| small_cyl_1b.stl | 767.3KB | |
| small_cyl_support1.stl | 60.0KB | |
| t_pipe_joint1.stl | 173.8KB | |
| wheel_axle_support1.stl | 65.6KB | |
| wheel_base1.stl | 2.2KB | |
| wheel_half1.stl | 114.1KB | |
| whole_flask1.stl | 1.1MB | |
| whole_flask_support1.stl | 52.2KB | |
| whole_hvy_block1.stl | 71.0KB | |
| whole_large_cyl1.stl | 575.8KB | |
| whole_large_cyl_support1.stl | 48.5KB | |
| whole_large_pipe1.stl | 140.5KB | |
| whole_piston1.stl | 190.7KB | |
| whole_piston_axle1.stl | 48.4KB | |
| whole_wheel1.stl | 152.2KB | |
| whole_wheel_axle1.stl | 89.7KB | |
| x_pipe_joint1.stl | 91.8KB |
