Ring Replacement For Si-Tech Antares Dry Glove Diving System 3D Printer Model
The file 'Ring Replacement For Si-Tech Antares Dry Glove Diving System 3D Printer Model' is (STL) file type, size is 9.9KB.
The file 'Ring Replacement For Si-Tech Antares Dry Glove Diving System 3D Printer Model' is (STL) file type, size is 9.9KB.
Here it is another example when having a 3D printer save my ass and a few coins.
Going in two days to get my Ice Diving certificate, I bought the dry glove system in my dry suit. Trying to fit the blue gloves i broke the blue ring, if I had time for 5$ plus shipment I could get a replacement, but time wasn't in my favor.
After a few tries, I got a ring that fits perfectly, so in a remote case where you have the same dry glove system, a 3D printer and you break the ring ( pretty probable ;) ), here you have the replacement, hehe
What I did measure the perimeter of the original one and design it in the PC, but reducing the perimeter a few millimeters, because it was too big.
The best perimeter that fit my glove was a total of 179mm, with 1,5mm tick and 10mm tall.
| SiTech_Antares_InnerRing_278mm.STL | 23.9KB | |
| SiTech_Antares_InnerRing_279.STL | 23.9KB |
![Cylinders [Key Ring] 3D Printer Model](https://cdn.3axis.co/assets/67/fc/8c/29/67fc8c29-237a-4b34-8227-7c1ff1aa396e/images/ee9a588b-6fed-4708-86e7-afeb9612b244_thumb.jpg)
