Ring Indoor Cam Magnetic Base 3D Printer Model
The file 'Ring Indoor Cam Magnetic Base 3D Printer Model' is (stl) file type, size is 8.2KB.
The file 'Ring Indoor Cam Magnetic Base 3D Printer Model' is (stl) file type, size is 8.2KB.
This is a base for the Ring Indoor Camera that allows you to screw the base of the camera into this print.
It will require you to use 3mm screws, preferably pan head. You will have to use force to screw them in as it's made so that the screws create the threads the first time you screw them in. I use a drill on a low speed to drive the screws in.
The magnets I used, I had on hand from another project but they are these:
https://www.amazon.com/gp/product/B0B1M73Y18
They are very strong and if you can find different magnets that are the same size, I would get something not as strong. Something like this:
https://www.amazon.com/gp/product/B0967W4THW
The magnets can be glued in but I made the hole for the magnet tight enough to press fit them.
| Ring_Indoor_Cam_Magnetic_Base.stl | 47.9KB |
