This is a customizable right angle bracket for use with OpenBuilds V-Slot or other Aluminum extrusion.
The "solid" type is designed to be as sturdy as possible, with minimal cuts into the object.
The "hollow" version is designed to be reasonably sturdy while using less material and less print time.
All provided STLs are for 20mm wide extrusion and M5x8 bolts, but may be customized for any other type of extrusion or bolt size, etc.
| 90bracket.scad | 5.5KB | |
| hollow_100mm_2bolt_5mmBrace.stl | 1.9MB | |
| hollow_22mm_1bolt_3mmBrace.stl | 982.1KB | |
| hollow_40mm_2bolt_5mmBrace.stl | 1.9MB | |
| hollow_60mm_2bolt_5mmBrace.stl | 1.9MB | |
| hollow_80mm_2bolt_5mmBrace.stl | 1.9MB | |
| solid_100mm_2bolt.stl | 1.8MB | |
| solid_22mm_1bolt.stl | 859.8KB | |
| solid_40mm_2bolt.stl | 1.7MB | |
| solid_60mm_2bolt.stl | 1.7MB | |
| solid_80mm_2bolt.stl | 1.8MB |
