Rhodesian A76 Radio 3D Printer Model
The file 'Rhodesian A76 Radio 3D Printer Model' is (stl) file type, size is 416.6KB.
The file 'Rhodesian A76 Radio 3D Printer Model' is (stl) file type, size is 416.6KB.
This is a replica Rhodesian A76 radio. This was created for the purpose of reenacting various conflicts and historic displays at events.
The knobs are slightly undersized so they can fit into the "Top" plate and spin or be glued in place.
The antenna pyramid will fit and thread a whip antenna, just like the originals. PRC antennas worked well.
The handset plug needs to be printed twice and will sandwich a handset cord and slip into one of the handset plugs.
The other handset plug is unused and has a screw top cap.
The battery box had metal latches that attached it to the radio body.
We used the radios to great success at a few events and housed a simple BaoFeng UV5R inside with a long spiral cord to a simple military radio handset.
This was modeled from an actual radio and is as painstakingly close to the original as possible.
| A76_Antenna_Pyramid.stl | 205.7KB | |
| A76_Battery_Box.stl | 117.1KB | |
| A76_Body.stl | 121.6KB | |
| A76_Handset_Plug.stl | 112.2KB | |
| A76_Radio_Cap.stl | 483.8KB | |
| A76_Small_Knob.stl | 211.0KB | |
| A76_Top.stl | 323.7KB |
