Model of the RhB bernina crocodile. Requires 2 regular LGB motor blocks.
lights : 4x 3mm warm white leds, 2x warm white SMD, 2x red SMD (0812 or smaller),
Use M5 bolts/washers to connect the motor units to the middle frame.
2.55 screws to connect the parts together.
Please let me know if you need more info how to put the parts together.
Roof can either be printed in 1 piece or in 2 pieces (A&B)
| middlebarsbelow.stl | 66.9KB | |
| middlecabin.stl | 230.4KB | |
| middlecabinbar.stl | 64.3KB | |
| middlecablleft.stl | 276.1KB | |
| middlecabright.stl | 235.0KB | |
| middledoorbar.stl | 60.8KB | |
| middledoorhandle.stl | 30.0KB | |
| middlehalfframe.stl | 221.2KB | |
| middlelowparts.stl | 619.4KB | |
| middlestep.stl | 9.8KB | |
| middletoplight.stl | 16.3KB | |
| middlewindowdoor.stl | 57.5KB | |
| middlewindowfront.stl | 57.5KB | |
| middlewindowmidside.stl | 55.2KB | |
| middlewindowmidsideinner.stl | 25.7KB | |
| middlewinmid.stl | 73.1KB | |
| motorA.stl | 841.4KB | |
| motorB.stl | 461.0KB | |
| motorbuffer.stl | 22.5KB | |
| motorfronthook.stl | 75.1KB | |
| motorfrontlight.stl | 24.9KB | |
| motorlgbblockholder.stl | 7.7KB | |
| motor_bar2.stl | 144.1KB | |
| motor_barfront.stl | 46.0KB | |
| motor_hose.stl | 90.8KB | |
| motor_step.stl | 56.1KB | |
| roodhalfA.stl | 38.6KB | |
| roodhalfB.stl | 38.6KB | |
| rooffull.stl | 62.0KB | |
| roofplankA.stl | 13.8KB | |
| roofplankB.stl | 4.6KB | |
| roofpower1.stl | 738.9KB | |
| roofpower2.stl | 15.9KB | |
| roofpower3.stl | 54.0KB | |
| roofpower4.stl | 15.9KB | |
| roofpower5.stl | 123.5KB | |
| roofthingA.stl | 25.7KB | |
| roofthingB.stl | 395.4KB | |
| roofthingC.stl | 45.2KB | |
| roofthingD.stl | 22.0KB | |
| roofthingE.stl | 938.1KB |
