Inspired by the Corsair LT100 Smart Lighting Towers but not willing to shell out $130 for a pair of them I designed this.
UPDATE: Base and lid thickness increased for improved stability. The previous iteration was a little wobbly and possibly prone to breakage at the tower base due to a relatively thin skin on the top and bottom of the base.
2nd UPDATE: There are now v2.5 versions of the towers. These include an 8mm insert to help align and stabilize the two tower halves. You need to make sure your printer and slicer are well calibrated with proper esteps, horizontal expansion, and flow rates for these pieces to fit properly. I suggest printing samples of just the top 20mm of each model to make sure they fit before printing the whole tower.
3rd UPDATE: I've added a calibration print. This is a small sample of how the two halves of the v2.5 towers fit together. You can use this quick print to make sure your printer and slicer settings are calibrated properly so the pieces will slide together properly.
| calibration_print.stl | 11.4KB | |
| Lid.stl | 15.7KB | |
| Master_Base.stl | 24.9KB | |
| Master_Base_v2.5.stl | 26.1KB | |
| Slave_Base.stl | 20.1KB | |
| Slave_Base_v2.5.stl | 21.2KB | |
| Tower_Top.stl | 5.6KB | |
| Tower_Top_v2.5.stl | 6.7KB |
