The file 'Revisited Hellraiser Torment Puzzle Box 3D Printer Model' is (stl) file type, size is 19.2MB.
The box is composed of 2 main parts (First Half and Second Half), while the internal mechanism works thanks to a double pipe system with a terminal thread that allows the two main parts to connect and rotate. I separated the second half male thread (that has to be glued to the second half) so that you can print it at 0.1mm resolution. There also is a closing cap, that has to be glued on top of First half.
The decorative external patterns are supposed to be printed with a 0.2mm nozzle, but you can print them with a 0.4mm as well.
So, a little recap:
-Print First and Second Half at 0.2mm resolution or more.
-Print the threaded pipe and the male thread at 0.1mm resolution.
-Print the other smooth pipe and the closing cap at 0.2mm resolution.
-Print the decorative patterns (named by face) preferably with a 0.2mm nozzle.
-Glue the male thread to the second half in the square cavity.
-Insert the smooth pipe and the threaded pipe into Firts half ( has shown in the explicative image attached
-Join the two halfs screwing the male and the female threads.
-Glue the decorative patterns to the box faces.
Enjoy Cenobites arrival ;-)
*EDIT:
I uploaded the complete Face A STL, as you made me notice that it lacked of some details.
1_First_half.stl | 647.0KB | |
2_Second_half.stl | 430.2KB | |
3_Threaded_tube_inside.stl | 2.7MB | |
4_Pipe-inside.stl | 611.2KB | |
5_Thread_second_half.stl | 2.2MB | |
6_top_close.stl | 262.8KB | |
Face_A_mod.stl | 23.6MB | |
Face_B.stl | 13.8MB | |
Face_C.stl | 9.2MB | |
Face_D.stl | 9.1MB | |
Face_E.stl | 15.1MB | |
Face_F.stl | 23.7MB |