Reusable Spool With Hex Grid 3D Printer Model
The file 'Reusable Spool With Hex Grid 3D Printer Model' is (scad,STL,stl) file type, size is 14.9MB.
The file 'Reusable Spool With Hex Grid 3D Printer Model' is (scad,STL,stl) file type, size is 14.9MB.
This remix of https://www.thingiverse.com/thing:2791930 adds rings and hex grid sides, to improve stability and avoid the filament hopping outside, which I found was a problem with the original. It also adds parking for the filament end. I tried to keep the filament usage still pretty low.
This is a further evolution of https://www.thingiverse.com/thing:4932151. I have added an optional plate for the sticker and added the option of having tubes instead of just holes to park the filament in. I also cleaned up the code.
It requires a repaired version of the flat part of the Little Masterspool, as OpenSCAD finds errors in the original. For convenience, I'm including the other part as well as the hexgrid.scad library I use for it, which unfortunately I don't know where I got.
Print one flat and one with pegs, you can mix and match if you want. Prints without supports. Like the original, clip the two parts together and then put a piece of filament or something through the holes when it clips together to keep it from coming apart again.
| hexgrid.scad | 1.1KB | |
| Little_Masterspool_Part1_final.STL | 4.1MB | |
| Little_Masterspool_Part_2_V2_repaired.STL | 3.5MB | |
| ReusableSpoolHex.scad | 3.3KB | |
| ReusableSpoolHex_Flat_Nosign_Holes.stl | 4.1MB | |
| ReusableSpoolHex_Flat_Nosign_Tubes.stl | 3.3MB | |
| ReusableSpoolHex_Flat_Sign_Holes.stl | 4.1MB | |
| ReusableSpoolHex_Flat_Sign_Tubes.stl | 3.3MB | |
| ReusableSpoolHex_Pegs_Nosign_Holes.stl | 4.7MB | |
| ReusableSpoolHex_Pegs_Nosign_Tubes.stl | 3.6MB | |
| ReusableSpoolHex_Pegs_Sign_Holes.stl | 4.7MB | |
| ReusableSpoolHex_Pegs_Sign_Tubes.stl | 3.6MB |
