Retro TV Case For Raspberry Pi 3b 3D Printer Model Free Download

Description Files (10)

Summary

This model is now outdated. Check out V2 here

Retro TV case based on a Toshiba Blackstripe I made for a Raspberry Pi 3b to run RetroPie and play cartoons. Designed to fit a Pi 3b with a 3.5 inch HDMI MPI3508 LCD display. Includes a "no-signal" custom splashscreen for RetroPie.

In addition to the print you'll need:

Raspberry Pi 3b (might fit Pi 4 but I haven't tested)
3.5 inch HDMI MPI3508 LCD display with HDMI crow connector (such as this one)
Right angle micro-usb adapter (such as these) to allow power cable to be connected from the back of the TV. Pi 3B uses the “down” version.
SD card with RetroPie (or whatever you want to run)
4x M2.5x5 screws for the shell
2x M2.5x8 screws for the antennae
2x M2.5x8 screws for the base

Optional:

30mm 5V fan (such as this one)

All parts except base, pi_case, and viewport should be printed with supports.

RetroPie notes:
I used the following values in my /boot/config.txt to reduce the display output to 4:3.
overscan_left=-10
overscan_right=65

CHANGELOG

Feb 13 2023

Added USB adapter bracing tab to Base.

Feb 3 2023

Added speaker gaps to Front grill.

Feb 1 2023

Added 30mm fan mountable version of Back.
Added channel gap in Pi Case for fan wires.
Cut left side corners off Viewport for better fit.

Have fun!

antenna.stl	35.2KB
antenna_base.stl	43.4KB
back.stl	288.0KB
back_fan_mount.stl	393.8KB
base.stl	74.1KB
front.stl	312.1KB
knob.stl	71.4KB
pi_case.stl	165.4KB
shell.stl	113.4KB
viewport.stl	44.5KB

Retro TV Case For Raspberry Pi 3b 3D Printer Model

Summary

Tags

You might also like