Retro RC Race Plane 3D Printer Model
The file 'Retro RC Race Plane 3D Printer Model' is (stl) file type, size is 7.6MB.
The file 'Retro RC Race Plane 3D Printer Model' is (stl) file type, size is 7.6MB.
My first micro size plane designed to be fully 3D printed. It is a work in progress, I have not printed the full plane in this size yet but did experiment with print settings for the parts and made a smaller rubber powered version at 75% scale. There are two versions of some of the parts: one for printing in shell/vase mode (spiralized even) and one that can be printed in normal mode. No infill or supports required. There is a hole in the wing for a 4mm carbon fiber spar for added strength.
| Aileron.stl | 59.6KB | |
| Canopy.stl | 281.0KB | |
| Elevator.stl | 585.2KB | |
| Elevator_shell_mode.stl | 883.4KB | |
| Fuselage.stl | 1.6MB | |
| Fuselage_hatch_shell_mode.stl | 380.2KB | |
| Fuselage_nose_shell_mode.stl | 1.3MB | |
| Fuselage_tail_shell_mode.stl | 1.9MB | |
| Landing_gear_strut.stl | 14.9KB | |
| Landing_strut_fairing.stl | 222.2KB | |
| Nose_cone.stl | 151.9KB | |
| Nose_cowl.stl | 829.3KB | |
| Nose_cowl_shell_mode.stl | 1013.0KB | |
| Rudder.stl | 394.9KB | |
| Stabilo.stl | 496.5KB | |
| Stabilo_shell_mode.stl | 515.3KB | |
| Tail_wheel.stl | 365.1KB | |
| Tail_wheel_strut.stl | 109.8KB | |
| Wheel.stl | 525.7KB | |
| Wheel_fairing.stl | 426.3KB | |
| Wing.stl | 3.6MB | |
| Winglet.stl | 728.2KB | |
| Wing_shell_mode.stl | 1.6MB | |
| Wing_tip.stl | 650.8KB |
