Retractable / Foldable / Collapsible Harry Potter Magic Wand 3D Printer Model
The file 'Retractable / Foldable / Collapsible Harry Potter Magic Wand 3D Printer Model' is (stl) file type, size is 4.6MB.
The file 'Retractable / Foldable / Collapsible Harry Potter Magic Wand 3D Printer Model' is (stl) file type, size is 4.6MB.
Welcome back witches and wizards!
I designed this collapsing wand, it's pretty straight forward.
Watch this short video for printing an assembling:
I recently updated the files, you can now choose from parts 2 if you want to print all inner pieces at once (2.1) or one by one (2.2.1 - 2.2.4) in vase mode. For the smallest of the inner pieces there is one hollow one (2.2.1 ... hollow) and one massive one (2.2.1 .... massive).
There are now several end knobs to choose from: 3.1 (all screw tops at once, the buttom one with my logo) 3.2 flat, 3.3 a roundert one and 3.4 the top screw ring as single file.
ONE IMPORTANT SETTING IN CURA:
I use cura as a slicer, I had to put my HORIZONTAL EXTENSION to -0.1, for the telescope parts, so thes CONSIST ONLY OF 2 LAYER LINES beside each other. This may also print without this setting, but it worked great for me.
Make also sure NOT to use supports for all the parts.
The rest was just printed with 0.2mm Layer height and 20% infill.
Of course it is possible to use different colors for all the parts.
| 1_-_telescope_wand_handle.stl | 1.6MB | |
| 2.1_-_telescope_wand_shaft__all_3_pieces.stl | 541.5KB | |
| 2.2.1_telescope_wand_inner_section_1_hollow.stl | 443.1KB | |
| 2.2.1_telescope_wand_inner_section_1_massive.stl | 418.4KB | |
| 2.2.2_telescope_wand_inner_section_2.stl | 49.3KB | |
| 2.2.3_telescope_wand_inner_section_3.stl | 49.3KB | |
| 3.1_-_telescope_wand_both_screw_knobs.stl | 3.8MB | |
| 3.2_-_telescope_wand_2.0_buttom_screw_knob_alternative_2_-_flat.stl | 1.4MB | |
| 3.3_telescope_wand_2.0_button_screw_knob_alternative_1.stl | 1.5MB | |
| 3.4_telescope_wand_2.0_top_screw_ring.stl | 1.4MB |
