Update: I've uploaded a bolt-on version of these brackets. They require a tool to add and remove but are held more firmly.
The swing-away foot rest hangers on the Quickie P222 are difficult to operate with one hand. Once released, off-axis pressure from the foot causes the hanger to go out of the vertical. The latching mechanism does not work properly unless the hanger bushing is pressed against the receiver which requires two hands.
This bracket is designed to slip over the latch assembly and hold the bushing against the receiver. It was designed to attach without fasteners so that it can be removed without tools.
This bracket was designed to mate with the Quick P222 70 Degree Swing-Away Hanger
It may also work with hangers which use the same pin & latch mechanism.
| wheelchair_hanger_bracket_left.stl | 101.4KB | |
| wheelchair_hanger_bracket_right.stl | 101.4KB |
