Resurrection Ship 3D Printer Model
The file 'Resurrection Ship 3D Printer Model' is (stl) file type, size is 2.1MB.
The file 'Resurrection Ship 3D Printer Model' is (stl) file type, size is 2.1MB.
This is a version of the Resurrection Ship from Battlestar Galactica. I skipped the long antenna as this would be way to fragile.
As I can't make my printer to stop stringing, this ship has to be printed im many single files, which need to be glued together.
You need:
1x Spine Upper
1x Spine Lower (this part needs to be printed with support!)
3x Spike Keyhole (which will give six "spikes", three on either side of the keyhole)
18x Spike closed (they go all on the upper side of the ship, look at the pictures)
28x Spike open (lower side of the ship, on top of engine section and to the front.)
| Spike_Closed_18.stl | 71.3KB | |
| Spike_Keyhole_3.stl | 53.4KB | |
| Spike_Open_28.stl | 76.9KB | |
| Spine_Lower.stl | 3.7MB | |
| Spine_Upper.stl | 4.0MB |
