Resin Cupholder Box V2 3D Printer Model

Author: @
License: CC BY-NC
File formats: stl
Download type: zip
Size:2.1MB

The file 'Resin Cupholder Box V2 3D Printer Model' is (stl) file type, size is 2.1MB.

Summary

Resin Cupholder Box v2 (larger)

Box with Holders for 8 Cups (with Resin).
Protection from Sunlight, Easy opening and closing. Fits small (shot) cups.

After printing, take the print parts B, b, G, g, H and h, and glue the tiny magnets into the round holes. You will need 36 magnets in total

I ordered my magnets off Amazon (Pack of 50 2 mm x 1 mm Small Magnets Strong). The printed holes have the size of round magnets, diameter 2mm and thickness 1mm.

You can install the Hinges before or after assembling the Box, but I recommend doing it prior to Assembly. I like to use tiny screws, but depending on set filling density, hot glue or instant adhesives might work better. You will need 8 hinges in total. They are installed like followed.
Hinges, Connecting:
E with Top Sas
e with Top cha
F with G
f with g

I ordered my small hinges off Amazon (Pack of 50 Mini Hinges Folding Small). But similiar 8x10mm hinges would do (example below).

For building the Box, start by sticking together B and C, and b with the second C. Then you stick F and E into BC. After that, you slide D in between F and E, followed by d. You finish by pushing this construct and bC together, and the result of that on top of part A and a. A and a are also connected by "sliding" into place.

If you have already installed the Hinges and magnets, you are now finished and can begin your creative work. If not, you will have to install them now.

For the cups, I ordered mine off Amazon as well (Pack of 100 Plastic Shot Glasses 2 cl / 20 ml). The prepared holes have a diameter of 32mm.

Please post your make! And keep me posted regarding adjustments and errors.
Feedback IS welcome!
x SaschaVMeng

ResinCupholderBoxV2_Back_Left.stl 497.3KB
ResinCupholderBoxV2_Back_Right.stl 516.9KB
ResinCupholderBoxV2_Bottom_Left.stl 686.0KB
ResinCupholderBoxV2_Bottom_Right.stl 704.2KB
ResinCupholderBoxV2_CutCornerSides.stl 483.7KB
ResinCupholderBoxV2_Front_Bottom_Left.stl 500.6KB
ResinCupholderBoxV2_Front_Bottom_Right.stl 517.0KB
ResinCupholderBoxV2_Front_Top_Left.stl 181.1KB
ResinCupholderBoxV2_Front_Top_Right.stl 239.4KB
ResinCupholderBoxV2_Middle_Left.stl 399.2KB
ResinCupholderBoxV2_Middle_Right.stl 421.2KB
ResinCupholderBoxV2_Sides.stl 854.9KB
ResinCupholderBoxV2_Top_Left.stl 457.3KB
ResinCupholderBoxV2_Top_Right.stl 415.8KB