Resealable Oil Quart Extension 3D Printer Model
The file 'Resealable Oil Quart Extension 3D Printer Model' is (stl) file type, size is 1.5MB.
The file 'Resealable Oil Quart Extension 3D Printer Model' is (stl) file type, size is 1.5MB.
I have an old airplane where the oil cap isn't really accessible and always ended up spilling oil inside the cowling when I added it. But I'd frequently only add a quarter of a quart or half a quart at a time. So if I used a normal funnel, it'd end up being a mess.
In order to completely avoid a mess or waste, I wanted some kind of funnel that could be permanently attached onto the oil quart (securely) and capped off for the next use. I also wanted it to be small enough to fit inside of a gallon bag as a secondary container. Every existing product I tried either had too lose of a fit, or the cap wasn't secure enough to keep the oil in. So I designed my own.
Also note I've specifically designed this to fit Aeroshell W100... I'm assuming other oil quarts are the same thread. It fits the top of a 2 liter soda bottle pretty well too (not sure why you'd need it for that, but why not...). But don't mix oil and soda... bad idea.
| oil_cap_extension.stl | 766.7KB | |
| oil_cap_extension_bent.stl | 683.4KB | |
| oil_cap_extension_bent_long.stl | 745.9KB | |
| oil_cap_extension_long.stl | 679.6KB | |
| oil_cap_extension_short.stl | 582.9KB |
