RepRap Wallace 3D Printer Model
The file 'RepRap Wallace 3D Printer Model' is (stl,dxf,scad) file type, size is 514.9KB.
The file 'RepRap Wallace 3D Printer Model' is (stl,dxf,scad) file type, size is 514.9KB.
This is a parametric Reprap printer based loosely on the Printrbot design. It is designed for NEMA14 motors, 6mm rods, and LM6UU bearings, though the hardware can be changed by modifying the parameters in the scad file.
The Reprap Wallace is now on github: https://github.com/whosawhatsis/RepRap-Wallace
There is a video of an axis test using Marlin on youtube: http://www.youtube.com/watch?v=0QrEmGlZT0w&context=C3f40eeaADOEgsToPDskJ7qwV6fvNjtb93Wcpz_SHy
More documentation, pics, and video on the Reprap Wiki page: http://reprap.org/wiki/Wallace
| 100mm_plate_1.stl | 260.2KB | |
| 100mm_plate_2.stl | 283.5KB | |
| 100mm_plate_3.stl | 165.7KB | |
| 200mm_plate.stl | 2.3MB | |
| base.stl | 164.1KB | |
| bed_mounts.stl | 146.5KB | |
| feet.stl | 168.6KB | |
| idler_double-bearing.stl | 498.4KB | |
| idler_single-bearing.stl | 472.6KB | |
| leadscrew_couplers.stl | 92.2KB | |
| MXL_pulleys.stl | 509.7KB | |
| platform.dxf | 15.0KB | |
| wallace.scad | 21.7KB | |
| x_carriage.stl | 226.5KB | |
| x_end_left.stl | 215.9KB | |
| x_end_right.stl | 304.3KB | |
| y_bearing_retainers.stl | 365.4KB | |
| y_idler.stl | 47.9KB | |
| z_top_clamps.stl | 62.1KB |
