RepRack Filament Tags 3D Printer Model
The file 'RepRack Filament Tags 3D Printer Model' is (stl) file type, size is 44.8KB.
The file 'RepRack Filament Tags 3D Printer Model' is (stl) file type, size is 44.8KB.
Printed these to label my filaments on my RepRack. Easy print without the need for an AMS. Just pause at layer 32 for me and change filament to a different color. If you print a whole plate full of these I recommend using a brim as the beginning of the print is a narrow piece without a lot of surface area. I didn't use a brim but I had a couple come loose, so if I were to do it again I'd just use a brim.
This uses a 3x3mm magnet to attach to EMT conduit on RepRack
| Filament_Tag_Arrow.stl | 29.5KB | |
| Filament_Tag_Blank.stl | 19.7KB | |
| Filament_Tag_PETG.stl | 51.0KB | |
| Filament_Tag_PLA.stl | 34.9KB | |
| Filament_Tag_Small_Blank.stl | 28.3KB |
