Replica Of Grenadier Wizard’s Room 2009C Miniature 3D Printer Model
The file 'Replica Of Grenadier Wizard’s Room 2009C Miniature 3D Printer Model' is (stl) file type, size is 22.5MB.
The file 'Replica Of Grenadier Wizard’s Room 2009C Miniature 3D Printer Model' is (stl) file type, size is 22.5MB.
This is a replica of figure C from the box "Wizard's Room", number 2009 from Grenadier
(see http://www.dndlead.com/grenadier/ADandD/2009.jpg )
Reproduced using
https://www.thingiverse.com/thing:1762299
"Work desk w/ components"
This shipped as a 2-piece model. Since I did not glue the 2 pieces together, I was able to scan them separately, which was good because I don't know how I would have imaged the underside of the table otherwise. Two separate model files are included. They are sized slightly differently, so pay attention to the printing instructions.
Note that I had considerable difficulty printing this model, with Cura disconnecting from the printer, printer stopping midprint, failing to extrude filament properly, etc. I suspect that the wizard has put a curse on the table. You have been warned!
| Wizards-Room-2009C-1.stl | 16.1MB | |
| Wizards-Room-2009C-2.stl | 12.9MB |
