These are replacement parts for a 5 gallon collapsible water storage cube. These cubes are great for camping, but the valve parts break easily or get lost.
There are 4 parts:
Direct replacement for the original valve handle, assuming the valve base is not broken.
Direct replacement for the original threaded part that attaches the valve to the container. Can also be used with the below 'B' valve.
if your original valve plug is broken/lost you will need to print both of these parts, which are a different design from the original. The original valve base design is not conducive to 3D printing, it would never seal properly.
Tolerances are tight the surfaces that rotate against eachother for the valve seal, may require some adjustment on your printer. I recommend adjusting the valve handle with horizontal expansion until it fits the base properly. Also recommend using a dab of silicone grease or petroleum jelly to lubricate and help it seal better.
| WaterCube_ValveBaseB.STL | 158.1KB | |
| WaterCube_ValveHandleA.STL | 80.0KB | |
| WaterCube_ValveHandleB.STL | 92.1KB | |
| WaterCube_ValveNut.STL | 456.1KB |
